China Zhejiang Hanlong New Material Co., Ltd. Company News

Blog Professional evaluation data interpretation: wide temperature range camping tent PVC coated canvas This product is designed to cope with extreme temperature difference environments, and its core advantages have been verified through a series of professional tests. According to authoritative laboratory thermal aging and low-temperature bending tests, the material does not crack when folded at -20 ℃. After being exposed to high temperature for 500 hours at 70 ℃, the tensile strength retention rate still exceeds 85%, demonstrating excellent wide temperature range adaptability. The peel strength between its PVC coating and high-strength polyester base fabric is stable at over 90N/5cm, ensuring a sturdy structure. At the same time, the material maintains its waterproof integrity (hydrostatic pressure ≥ 4000mm) after 10000 MIT bending tests, making it a reliable all climate solution designed for professional camping and car canopies. Wide temperature range camping tent PVC canvas selection guide 1. Core temperature domain verification dataIt is necessary to verify that the temperature range of the material is supported by actual measurements. Require suppliers to provide reports of -20 ℃ low-temperature bending test and 70 ℃ thermal aging test (≥ 500 hours) to ensure that the tensile strength retention rate is greater than 85%. Ordinary PVC fabric is prone to brittleness or softening at extreme temperatures.2. Waterproof and structural strength indicatorsFocus on key performance: The static water pressure value should be ≥ 4000mm to ensure no leakage during continuous heavy rain; The peel strength should be ≥ 90N/5cm, which is the basis for the fabric not to delaminate under temperature difference deformation. Products below this standard have insufficient long-term reliability.3. Durability testing requirementsInquire about the MIT flexural strength test results (recommended ≥ 10000 times), high values indicate that repeated folding is less likely to cause cracks. Simultaneously confirm whether the fabric has undergone UV resistant treatment (weather resistance ≥ 3000 hours) to achieve long-term outdoor service life. Q: How does this tent fabric perform in high-altitude environments with large temperature differences between day and night?Answer: Very stable. We use it in areas with an altitude of 3500 meters, where the temperature difference between day and night often exceeds 30 ℃. The material does not harden at low temperatures and does not soften at high temperatures. Its measured tensile strength retention rate remains above 88%, fully meeting the performance commitment of a wide temperature range.Q: Will the waterproof performance decrease after long-term exposure to sunlight and rain?Answer: There is no significant decrease. The tent has undergone two consecutive seasons of outdoor use, with a static water pressure value consistently maintained above 4000mm. After multiple heavy rain tests, the tent remained dry and there was no leakage at the seams, proving the excellent durability of its waterproof coating.Q: Does frequent construction and strong winds cause significant damage to materials?Answer: The damage is controllable. Completed over 30 disassembly and assembly processes within a quarter, with no obvious fatigue damage on the surface of the fabric. After encountering an instantaneous level 8 wind, the structure remained intact, and the peel strength test value was still higher than 85N/5cm, indicating satisfactory wind resistance and durability. Company Backround: Zhejiang Hanlong New Materials Co.,Ltd.      Was established in 2016.It is a modern enterprise engaged in industrial fabric research and development,design,production,and sales.      The company has introduced advanced coating and laminating production lines, -mainly producing PVC,PET,TPU,TPO,and other sandwich materials used in tents,membrane structures,airtightness,luggage,protection,medical,and other fields. Contact us Tel:0086 15958345754  Email: Lex@zjhanlong.cn Our Fcatory:Building B, No. 16 Huajin Road, Zhouwangmiao Town, Haining City, Jiaxing City, Zhejiang Province

Blog Professional Evaluation Data Interpretation: Anti-Aging PE Waterproof Tarpaulin The product adopts a high-density polyethylene (HDPE/LLDPE) composite process with double-sided anti-aging treatment. According to authoritative xenon lamp aging tests (GB/T 16422.2), its UV resistance lifespan can exceed 5 years (stretch retention rate >80% after irradiation ≥1500KJ/㎡), far surpassing untreated ordinary tarps. Professional testing shows a hydrostatic pressure value ≥3000mm, with no cracks or brittleness after -20℃ low-temperature bending and 50℃ high-temperature exposure cycling tests. The material weight can be customized (80-200gsm), and the surface micro-texture design enhances wear resistance and anti-slip performance (friction coefficient ≥0.5), providing reliable protection for long-term outdoor coverage. Selection and purchase guide for anti-aging PE waterproof tarpaulin 1. Core anti-aging dataBe sure to request an anti UV test report and pay attention to the retention rate of tensile strength after accelerated aging of xenon lamps. After a cumulative irradiation dose of ≥ 1500KJ/㎡ (simulating outdoor exposure for 5 years), the retention rate of high-quality tarpaulin should be greater than 80%. The data of "anti-aging" products with only common color masterbatch will be significantly lower.2. Waterproof and durability performance indicatorsThe key to waterproofing depends on the static water pressure value (recommended ≥ 3000mm) and the joint process. At the same time, it is required to provide the flexibility results after high and low temperature cycling tests (-20 ℃ to 50 ℃), and it is qualified if there are no cracks. The weight of the tarpaulin should be selected according to its purpose, and it is recommended to cover the roof with a weight of ≥ 150gsm for long-term use.3. Customization and certification requirementsConfirm customization options such as weight, size, color, and punching reinforcement. Products with anti-aging master batch addition certificate and third-party weather resistance certification are preferred, and their long-term reliability is far better than low-cost alternatives without data support. Q: What is the anti-aging effect of this tarpaulin under long-term outdoor exposure?Answer: We have been using it as a temporary cover for building roofs for nearly two years. After experiencing an equivalent cumulative ultraviolet radiation dose of over 1500KJ/㎡, the measured tensile strength retention rate of the material is still above 85%, and there is no obvious brittleness or discoloration on the surface, far exceeding that of ordinary polyethylene tarpaulins.Q: Can its waterproof performance withstand the continuous rainfall during the southern rainy season?Answer: Absolutely possible. During the month long rainy season, the static water pressure of the tarpaulin remained stable at over 3200mm, completely blocking rainwater infiltration. Through regular inspections, the joint is firmly pressed and there are no leakage points.Q: Is customizing thicker and heavier products more durable?Answer: Yes. We have chosen a customized specification with a thickness of 180gsm. In the past 18 months, it has experienced multiple strong winds and demonstrated outstanding tear resistance, with a longitudinal tear force retention rate of over 90%, effectively resisting accidental scratching by foreign objects such as branches. Company Backround: Zhejiang Hanlong New Materials Co.,Ltd.      Was established in 2016.It is a modern enterprise engaged in industrial fabric research and development,design,production,and sales.      The company has introduced advanced coating and laminating production lines, -mainly producing PVC,PET,TPU,TPO,and other sandwich materials used in tents,membrane structures,airtightness,luggage,protection,medical,and other fields. Contact us Tel:0086 15958345754  Email: Lex@zjhanlong.cn Our Fcatory:Building B, No. 16 Huajin Road, Zhouwangmiao Town, Haining City, Jiaxing City, Zhejiang Province

Blog Professional Evaluation Data Interpretation: PVC Airproof Fabric for Tent Inflation Columns: This product is a core material specifically designed for inflatable tent structures. Professional test data shows its exceptional airtightness performance, maintaining pressure for 24 hours under a working pressure of 60kPa with a pressure drop rate below 1.5%, far exceeding industry standards. The material employs a composite process of high-strength polyester base fabric and high-adhesion PVC coating, achieving a peel strength of ≥100N/5cm to ensure the coating does not delaminate during repeated inflation, deflation, and bending of the air columns. Its fatigue resistance has passed ≥100,000 pulse pressure tests, while retaining flexibility even in -25°C low-temperature environments, providing reliable structural support for various demanding outdoor conditions. PVC Air-Tight Fabric Guide for Inflatable Tents 1. Core airtightness dataWhen making a purchase, the primary concern is the airtightness and pressure holding data. Professional grade materials must have a pressure drop rate of ≤ 2% within 24 hours at a standard pressure of 40-60kPa. Suppliers can be requested to provide third-party pressure testing reports, as ordinary waterproof fabrics cannot meet this stringent requirement.2. Structural strength and durabilityInflatable frames require extremely high material strength. The base fabric should be made of high-strength polyester, with key indicators of longitudinal breaking strength ≥ 5000N/5cm and peel strength ≥ 100N/5cm. Insufficient data can easily lead to coating peeling or air column deformation after long-term use.3. Weather resistance and fatigue resistance certificationIt should be ensured that the material passes the low-temperature bending test (-25 ℃ without cracks) and a pulse fatigue test report of ≥ 100000 times should be provided. This is the key to ensuring the safe life of the air column under the temperature difference between day and night and frequent inflation and deflation, far superior to ordinary mesh without testing. Q: How does the stability and airtightness of the gas column perform in high-intensity commercial activities?Answer: Very outstanding. We used it continuously for 7 days at the outdoor music festival, and the air column remained stable. Through actual testing, its 24-hour pressure drop rate has always been below 1.8%, fully meeting its high standard of ≤ 2%, and is still reliable even in environments with a temperature difference of up to 20 ℃ between day and night.Q: Will frequent inflation and deflation affect material life or cause air leakage?Answer: The impact is minimal. This quarter, more than 80 rapid inflation and deflation constructions have been completed, and the surface and joints of the air column are intact. The material has passed high-strength fatigue resistance testing and has not experienced any air leakage or coating micro cracking problems caused by repeated deformation.Q: Is there any data to support durability under extreme weather conditions?Answer: Experienced strong winds (level 8) and low temperatures (-5 ℃). Under strong winds, there is no abnormal swinging of the air column structure, and the tensile strength retention rate is greater than 95%; Under low temperature conditions, the material has good flexibility, rapid rebound, and no hardening or embrittlement occurs. Company Backround: Zhejiang Hanlong New Materials Co.,Ltd.      Was established in 2016.It is a modern enterprise engaged in industrial fabric research and development,design,production,and sales.      The company has introduced advanced coating and laminating production lines, -mainly producing PVC,PET,TPU,TPO,and other sandwich materials used in tents,membrane structures,airtightness,luggage,protection,medical,and other fields. Contact us Tel:0086 15958345754  Email: Lex@zjhanlong.cn Our Fcatory:Building B, No. 16 Huajin Road, Zhouwangmiao Town, Haining City, Jiaxing City, Zhejiang Province

Blog This product is designed specifically for environmentally friendly camping equipment, using recycled polyester base fabric and water-based environmentally friendly PVC coating. It has been approved by OEKO-TEX ®  Standard 100 certification. Professional evaluation shows that its static water pressure value is ≥ 3000mm, which can ensure stable waterproofing under moderate to heavy rain; The unique microporous breathable structure ensures a moisture permeability rate of ≥ 3000g/㎡· 24h. Combined with surface fast drying treatment, the moisture diffusion rate is about 40% faster than conventional fabrics, effectively reducing condensation water. At a weight of approximately 450g/㎡, the material maintains a balanced tear strength of ≥ 80N and has good resistance to mold (tested by ASTM G21), achieving a professional balance between lightweight durability and environmental friendliness. Guide to purchasing eco-friendly quick drying camping tent fabric 1. Environmental certification is the coreWhen making a purchase, the first priority is to verify OEKO-TEX ®  Standard 100 or Bluesign ® Wait for authoritative environmental certification to ensure that there are no harmful substance residues in the fabric during the production process. Products that only claim to be "environmentally friendly" without specific certification have questionable safety.2. Performance data needs to be taken into accountThe key lies in the balance between hydrostatic pressure (≥ 3000mm) and moisture permeability (≥ 3000g/㎡· 24h). Some low-priced fabrics only focus on waterproofing, but their moisture permeability is insufficient (

Blog This product is a heavy-duty knitted PVC-coated canvas specifically designed for high-end tents. Its core performance has been professionally tested: featuring a high-density knitted base fabric with double-sided PVC coating, it achieves 100% light blockage (ASTM D5894 standard) and complete waterproofing with a hydrostatic pressure rating of ≥5000mm. The flame-retardant properties are certified to EN 13501-1 Class B-s1, d0, ensuring self-extinguishing upon flame removal. Its unique elastic knitted structure delivers excellent wrinkle and fatigue resistance, remaining crack-free after 10,000 MIT flex endurance tests. The heavy-duty specification (gram weight ≥850gsm) ensures structural stability under strong wind loads (wind resistance rating ≥10), making it a versatile material tailored for professional outdoor tents. 1. Basic Physical Properties: Weight and StrengthEnsure the grammage is no less than 850g/㎡, and provide a measured report on tear strength (longitudinal/latitudinal ≥3000/2500N). Insufficient data may compromise the tent's structural integrity under strong wind loads.2. Functional data: Shade and waterproofingProfessional-grade light-blocking requires a 100% light-blocking rate (0% light transmittance). During procurement, actual light source testing can be requested. The key to waterproofing is a hydrostatic pressure value of ≥5000mm, which ensures no leakage inside the tent during prolonged heavy rain, surpassing the standard 3000mm requirement for ordinary tents.3. Safety and Durability CertificationFlammability must provide an EN 13501-1 B-s1, d0 grade or equivalent certification report, which is a mandatory safety requirement for large-scale events. Additionally, inquire about the MIT folding resistance (recommended ≥10,000 cycles) data, as higher values indicate better long-term durability and resistance to brittleness or aging. Q: What is the actual waterproof and durable performance under outdoor rainstorm and exposure?Answer: Very reliable. After 48 hours of continuous heavy rain (with rainfall exceeding 100mm), the interior of the tent remained dry and the waterproof performance with a static water pressure value of ≥ 5000mm was fully verified. After four months of use under high-intensity ultraviolet radiation in summer, the material did not show yellowing or hardening.Q: Is the full shading effect truly worthy of its name?Answer: Fully compliant. We tested under strong noon light and found that the internal lighting intensity of the tent remained below 5 Lux, achieving a true 100% all black environment and meeting the strict requirements of high-end audiovisual activities and day night shift rest.Q: Are heavy-duty fabrics prone to wrinkling or damage during frequent disassembly and assembly?Answer: Excellent wrinkle resistance and durability. This quarter, we have completed over 15 quick disassembly and assembly constructions, and the fabric can naturally rebound and be flat without any residual wrinkles. The joint has undergone more than 5000 cumulative wind pressure fatigue tests and simulations, and currently remains intact and undamaged. Company Backround: Zhejiang Hanlong New Materials Co.,Ltd.      Was established in 2016.It is a modern enterprise engaged in industrial fabric research and development,design,production,and sales.      The company has introduced advanced coating and laminating production lines, -mainly producing PVC,PET,TPU,TPO,and other sandwich materials used in tents,membrane structures,airtightness,luggage,protection,medical,and other fields. Contact us Tel:0086 15958345754  Email: Lex@zjhanlong.cn Our Fcatory:Building B, No. 16 Huajin Road, Zhouwangmiao Town, Haining City, Jiaxing City, Zhejiang Province

Blog This industrial fast door special PVC coated polyester canvas has the core advantage of passing professional level flame retardant and durability evaluations. According to the third-party laboratory testing report, the material meets the B-s1 and d0 fire rating according to EN 13501-1 standard, and will extinguish immediately upon contact with an open flame, effectively suppressing the spread of fire. Its surface is coated with Teflon grade easy to clean coating, which reduces the adhesion rate of stains by 70%. After more than 10000 high-pressure water gun rinsing tests, the coating has not peeled off and the anti fouling performance remains stable. In terms of mechanical strength, the base fabric is made of high-strength polyester yarn, with a measured longitudinal breaking strength of ≥ 4500N/5cm, which can withstand the continuous impact caused by high-speed start stop and ensure long-term operation life in harsh industrial environments. Industrial Quick Door PVC Canvas Selection Guide: Professional Data Comparison 1. Core flame retardant ratingProducts with authoritative flame retardant certification are preferred for industrial environments. It is necessary to confirm that it meets EN 13501-1 B-S1, d0 level or equivalent (such as NFPA 701) and provide a testing report. This is far superior to ordinary materials that only claim to be "flame retardant" but lack certification, ensuring safety and delaying effects in the event of a fire.2. Mechanical strength and durabilityPay attention to two key data points: tear resistance strength (≥ 600N) and peel strength (≥ 80N/5cm). Frequent opening and stopping of high-speed doors require extremely high material toughness. High strength polyester base fabric can effectively resist repeated impacts and avoid tearing at connections. Poor quality fabrics often break prematurely under such dynamic loads.3. Data based cleaning performanceA truly easy to clean coating should be able to pass professional tests with an anti fouling rating of ≥ 4 (ISO 105-A02). When purchasing, it is possible to request actual measurement data on anti stain adhesion or conduct on-site oil pen application testing to ensure that daily maintenance only requires simple wiping, reducing long-term cleaning costs. Q: How durable is this material in highly corrosive environments in chemical workshops?Answer: After 12 months of use, there was no significant corrosion or coating peeling on the surface of the material. We regularly test its tensile strength retention rate, which still exceeds 90%, and its acid and alkali resistance meets industrial standards, ensuring long-term stable operation.Q: Does frequent start stop have a significant impact on the material joints?Answer: The impact is minimal. Our high-speed doors operate more than 400 times a day, and after 8 months of continuous use, the peel strength test value at the joint still remains above 85N/5cm, far above the industry safety threshold, without any cracking phenomenon.Q: How much is the actual efficiency improvement of cleaning and maintenance?Answer: Thanks to its PTFE grade easy to clean coating, daily cleaning time has been reduced by about 70%. Using neutral cleaning agents in combination with regular rinsing, a single deep cleaning can be completed within 5 minutes without affecting the flame retardant properties of the material surface. Company Backround: Zhejiang Hanlong New Materials Co.,Ltd.      Was established in 2016.It is a modern enterprise engaged in industrial fabric research and development,design,production,and sales.      The company has introduced advanced coating and laminating production lines, -mainly producing PVC,PET,TPU,TPO,and other sandwich materials used in tents,membrane structures,airtightness,luggage,protection,medical,and other fields. Contact us Tel:0086 15958345754  Email: Lex@zjhanlong.cn Our Fcatory:Building B, No. 16 Huajin Road, Zhouwangmiao Town, Haining City, Jiaxing City, Zhejiang Province

Blog Professional Evaluation and Interpretation: 2000GSM 1000D PVC Pool LinerThe core of this high-standard pool liner lies in its exceptional durability and anti-leakage performance. According to third-party laboratory destructive testing reports, with a fabric weight of 2000 grams per square meter (GSM) and a 1000D ultra-high-density polyester base fabric, it can withstand over 1200N of force in puncture strength tests, far exceeding the 500D fabric standard, effectively resisting damage from gravel or root systems. Additionally, its reinforced PVC coating maintains a hydrostatic pressure value of over 8000mm, ensuring absolute waterproofing and anti-leakage under long-term full-water pressure. Professional evaluations confirm its outstanding UV resistance and hydrolysis resistance, with a tensile strength retention rate exceeding 85% even after five years of simulated accelerated aging, making it an ideal choice for large permanent or semi-permanent pools. Professional Shopping Guide: 2000GSM 1000D Pool Liner PVC Fabric 1. Key Data Comparison Metrics: Weight and ThicknessPlease prioritize verifying the total fabric weight and thickness. The authentic 2000 GSM specification should have a thickness of ≥1.0mm (typically measured at 1.2-1.3mm). There are products on the market that use low-weight base fabric with thick coatings to counterfeit the genuine product. This can be identified by examining the base fabric density and coating uniformity through cutting sections.2. Professional Performance Data: Strength and DurabilityThe key lies in the strength data verified through professional testing. High-quality products must have a tensile strength (length/width) of ≥4000/3500N/5cm and a tear resistance of ≥350N, which serve as the core guarantee for long-term water pressure and pedestrian load-bearing capacity. Additionally, suppliers are required to provide test reports demonstrating UV resistance (weather resistance) of ≥5000 hours to ensure no brittleness during prolonged outdoor use. User feedback: Data verification of 2000 GSM pool linersQ: Will the material of 2000GSM become brittle at low temperatures in winter?Answer: Absolutely not. Even in the northern winter outdoors at -15 ℃, the material still maintains good flexibility. We have been using the material continuously for two complete winters without any cracks or hardening caused by low temperature, which meets the industry's low temperature bending test standards.Q: As a long-term reservoir, what is the actual anti-seepage performance?Answer: Stable and excellent performance. After 14 months of continuous full water observation (with an average depth of 1.2 meters) after installation, it was confirmed through professional water level monitoring that the monthly average leakage rate was below 0.3%, far better than the industry average for conventional 1000D materials.Q: Are the compression and durability data reflected in real use?Answer: The data support is clear. During peak usage season, the bottom of the pool is subjected to a water pressure of approximately 1.8 tons per square meter for a long time and experiences over a hundred daily stampedes. After three years of use, the surface wear rate of the material is only about 5%, and the tensile strength test value still remains above 87% of the initial value. Company Backround: Zhejiang Hanlong New Materials Co.,Ltd.      Was established in 2016.It is a modern enterprise engaged in industrial fabric research and development,design,production,and sales.      The company has introduced advanced coating and laminating production lines, -mainly producing PVC,PET,TPU,TPO,and other sandwich materials used in tents,membrane structures,airtightness,luggage,protection,medical,and other fields. Contact us Tel:0086 15958345754  Email: Lex@zjhanlong.cn Our Fcatory:Building B, No. 16 Huajin Road, Zhouwangmiao Town, Haining City, Jiaxing City, Zhejiang Province

Blog 1. Core material -500D PVC coated clothThis product uses high-density 500D polyester filament woven base fabric and is coated with high-quality PVC (polyvinyl chloride) coating on both sides. The density of 500D endows the fabric with excellent tear resistance and abrasion resistance, far exceeding ordinary Oxford fabric. The PVC coating ensures that the fabric is completely waterproof, mold resistant, and resistant to stains and chemical corrosion, providing a sturdy physical barrier for food transportation. 2. Functional Features - Waterproof and DurableThe key to the fabric lies in its excellent waterproof and sealing properties. The PVC coating forms a non porous film layer, giving the fabric a high hydrostatic pressure value that can withstand long-term rainwater erosion without leakage. At the same time, the coating process enhances the anti-aging performance of the material, ensuring that it can remain flexible and not brittle during repeated sun exposure, folding and use, and extending the service life. 3. Color Function - Meaning of Yellow FunctionUsing a bright yellow color is not just about aesthetics. In the industrial and logistics fields, yellow is an important warning and identification color. It can quickly identify insulated distribution bags in complex environments, improving operational safety and efficiency. At the same time, the bright colored surface helps to reflect some heat and has a certain auxiliary effect on maintaining the temperature inside the box. 4. Application scenario - isothermal food deliveryThis fabric is specially customized for making "food isothermal distribution bags". Its structure can effectively isolate the external temperature, and combined with internal insulation materials such as aluminum film and pearl cotton, it can maintain the heat or cold inside the box for a long time, reducing temperature fluctuations. It is widely used in temperature sensitive scenarios such as cold chain food delivery, fresh food delivery, and vaccine transportation to ensure food safety and quality. 5. Customization advantages - adapted to professional needsAs a "factory customized" product, customers can customize the width, length, thickness, weight, and subsequent processing (such as cutting, bonding, and bag making) of the coil according to specific needs. This flexibility ensures that the fabric can perfectly adapt to the production of insulation boxes, insulation covers, or car covers with different sizes and functional requirements, achieving optimized integration from materials to finished products. 1. Comparison of core parameters: thickness and weightDon't just look at '500D'. The key lies in the total thickness and weight. It is recommended to choose specifications with a thickness of ≥ 0.55mm and a weight of ≥ 650gsm. This ensures sufficient puncture resistance and thermal support. Ordinary 500D fabric has a durability difference of approximately 0.45mm/550gsm. 2. Waterproofing and Coating TechnologyPay attention to the hydrostatic pressure value; it is recommended to be ≥ 3000mm for food transportation. High-quality products adopt the "knife-scrapping coating" process, featuring thick and uniform coatings with intact waterproof films, while inferior products use "calendered coatings," where PVC is prone to cracking, peeling, and has a short lifespan. 3. Environmental Protection and Safety CertificationFood contact applications must be confirmed to be environmentally friendly and non-toxic. Suppliers are required to provide RoHS, REACH, or food-grade contact test reports. Ensure the PVC formulation contains no heavy metals and exhibits no odor migration, guaranteeing safe and compliant transportation. 4. Customization and processing requirementsClarify your processing method (such as high-frequency welding, sewing). When customizing, processing parameters (such as heat sealing temperature) need to be provided in order for the factory to optimize the coating formula. Inform the end use (such as the box or cover) and suggest an appropriate peel strength (recommended ≥ 80N/5cm). Q: Can this yellow fabric really resist rainy season rain?Answer: It is completely preventable. We made it into an insulated box cover, and during three consecutive months of rainy season distribution, its waterproof performance with a static water pressure value of ≥ 3500mm has withstood the test. The interior of the box remains dry without any leakage.  Question: What is the durability? Will frequent loading and unloading cause damage?Answer: Very wear-resistant. We use the delivery bags made from it for over 50 daily loading and unloading. After 8 months of use, the fabric has an extremely low wear rate and no tearing. Its weight of 650gsm and thickness of 0.58mm provide critical support. Q: Is it helpful for insulation?Answer: It has a significant auxiliary effect. As an external protective layer, its low thermal conductivity and dense structure effectively block external temperature shocks. Tested outdoors in summer, combined with internal insulation materials, it can extend the maintenance time of low temperature (0-4 ° C) inside the box by about 20%. Company Backround: Zhejiang Hanlong New Materials Co.,Ltd.      Was established in 2016.It is a modern enterprise engaged in industrial fabric research and development,design,production,and sales.      The company has introduced advanced coating and laminating production lines, -mainly producing PVC,PET,TPU,TPO,and other sandwich materials used in tents,membrane structures,airtightness,luggage,protection,medical,and other fields. Contact us Tel:0086 15958345754  Email: Lex@zjhanlong.cn Our Fcatory:Building B, No. 16 Huajin Road, Zhouwangmiao Town, Haining City, Jiaxing City, Zhejiang Province

  Blog Product Professional Knowledge Explanation:       This is not a simple plastic cloth, but a precise composite functional material. Its core is woven with high-strength polyester fibers (providing tear resistance and structural support), and then covered with PVC coating on both sides through precision technology.       This PVC coating not only seals all the mesh holes, but also provides complete waterproof and moisture-proof properties, giving the originally soft mesh wear resistance, oil resistance, aging resistance, and UV resistance.The coating process combines PVC and mesh fabric, avoiding delamination and peeling. So, it can be used as a sturdy and durable material in outdoor and industrial environments, such as truck tarpaulins, construction site fences, or storage covers PVC coated mesh cloth selection guide:      1.intensity index:Grid density and grammage   (1)Lightweight protection (such as temporary covering): Optional 500D and below, weight 200-250G.   (2)Heavy industry (such as truck canopy, construction site fence): 1000D × 1000D, 12 × 12 weaving, with a weight of 320G or more, should be selected. It has good tensile and tear resistance performance.      2.Durability key: PVC coating thickness and process   (1)The double-sided coating of the high-quality product is uniform, with a total thickness of ≥ 0.18mm, ensuring complete waterproofing and aging resistance.   (2)Long term outdoor use requires confirmation of its UV resistance level. Commercial grade products typically have an outdoor lifespan of 3-5 years.     3.Practical advice     (1)Request samples: Measure its flexibility, weight, and waterproofness.   (2)When comparing prices, products with a low unit price may experience shrinkage on the base weight or coating, affecting their actual service life, based on weight and thickness calculations. User feedback on actual application      Customer Mr. Zhang: "I used ordinary waterproof cloth before, but it broke in half a year. This time, I chose 1000D/320G PVC mesh cloth for the truck canopy. Is there a big difference in strength.      Reply: The data comparison is obvious. The tensile strength of ordinary fabric is usually between 600-800N, while the longitudinal and transverse tensile strength of 1000D mesh fabric can reach over 2000N, with a tear resistance improvement of about 70%. The combination of high-strength weaving and PVC double-sided coating enables the product to withstand sustained wind pressure and friction during actual transportation.     Another customer: "Will the waterproof performance decrease after one year of outdoor use.     Reply:When the thickness of high-quality PVC coating is ≥ 0.18mm, after accelerated aging testing (equivalent to two years outdoors), its waterproof performance retention rate still exceeds 95%. It is recommended to confirm the UV protection level when purchasing and regularly clean the surface to maintain the best waterproof and durability state     Multiple feedbacks indicate that after standardized installation, this material can maintain stable protective performance for 3-5 years under moderate weather conditions, significantly reducing replacement costs. Company Backround: Zhejiang Hanlong New Materials Co.,Ltd.      Was established in 2016.It is a modern enterprise engaged in industrial fabric research and development,design,production,and sales.      The company has introduced advanced coating and laminating production lines, -mainly producing PVC,PET,TPU,TPO,and other sandwich materials used in tents,membrane structures,airtightness,luggage,protection,medical,and other fields. Contact us Tel:0086 15958345754  Email: Lex@zjhanlong.cn Our Fcatory:Building B, No. 16 Huajin Road, Zhouwangmiao Town, Haining City, Jiaxing City, Zhejiang Province

Dear All Of My Friends, Wishing you a relaxing holiday season and a successful year ahead in 2026. B&rgds,Zhejiang Hanlong New Material Co.ltd

This high-quality PVC fence fabric offers an ideal solution for rolling privacy screens. Durable and weather-resistant, it provides excellent visual barriers for gardens, patios, construction sites, and events. Designed for easy installation on rolling systems, the fabric ensures long-lasting privacy and wind protection while withstanding sun, rain, and mildew.

Crafted for demanding medical environments, this heavy-duty PVC tarpaulin fabric provides a durable, protective cover for mattresses and equipment. Its primary feature is reliable flame retardancy, meeting key safety standards to resist fire. The material is also waterproof, easy to clean, and resistant to tears and abrasion, ensuring long-term performance and infection control. It's the essential choice for fire-resistant medical applications.