Blog

This industrial fast door special PVC coated polyester canvas has the core advantage of passing professional level flame retardant and durability evaluations. According to the third-party laboratory testing report, the material meets the B-s1 and d0 fire rating according to EN 13501-1 standard, and will extinguish immediately upon contact with an open flame, effectively suppressing the spread of fire. Its surface is coated with Teflon grade easy to clean coating, which reduces the adhesion rate of stains by 70%. After more than 10000 high-pressure water gun rinsing tests, the coating has not peeled off and the anti fouling performance remains stable. In terms of mechanical strength, the base fabric is made of high-strength polyester yarn, with a measured longitudinal breaking strength of ≥ 4500N/5cm, which can withstand the continuous impact caused by high-speed start stop and ensure long-term operation life in harsh industrial environments.

Industrial Quick Door PVC Canvas Selection Guide: Professional Data Comparison

1. Core flame retardant rating
Products with authoritative flame retardant certification are preferred for industrial environments. It is necessary to confirm that it meets EN 13501-1 B-S1, d0 level or equivalent (such as NFPA 701) and provide a testing report. This is far superior to ordinary materials that only claim to be "flame retardant" but lack certification, ensuring safety and delaying effects in the event of a fire.
2. Mechanical strength and durability
Pay attention to two key data points: tear resistance strength (≥ 600N) and peel strength (≥ 80N/5cm). Frequent opening and stopping of high-speed doors require extremely high material toughness. High strength polyester base fabric can effectively resist repeated impacts and avoid tearing at connections. Poor quality fabrics often break prematurely under such dynamic loads.
3. Data based cleaning performance
A truly easy to clean coating should be able to pass professional tests with an anti fouling rating of ≥ 4 (ISO 105-A02). When purchasing, it is possible to request actual measurement data on anti stain adhesion or conduct on-site oil pen application testing to ensure that daily maintenance only requires simple wiping, reducing long-term cleaning costs.

Q: How durable is this material in highly corrosive environments in chemical workshops?
Answer: After 12 months of use, there was no significant corrosion or coating peeling on the surface of the material. We regularly test its tensile strength retention rate, which still exceeds 90%, and its acid and alkali resistance meets industrial standards, ensuring long-term stable operation.
Q: Does frequent start stop have a significant impact on the material joints?
Answer: The impact is minimal. Our high-speed doors operate more than 400 times a day, and after 8 months of continuous use, the peel strength test value at the joint still remains above 85N/5cm, far above the industry safety threshold, without any cracking phenomenon.
Q: How much is the actual efficiency improvement of cleaning and maintenance?
Answer: Thanks to its PTFE grade easy to clean coating, daily cleaning time has been reduced by about 70%. Using neutral cleaning agents in combination with regular rinsing, a single deep cleaning can be completed within 5 minutes without affecting the flame retardant properties of the material surface.

Company Backround:

Zhejiang Hanlong New Materials Co.,Ltd.

     Was established in 2016.It is a modern enterprise engaged in industrial fabric research and development,design,production,and sales.

     The company has introduced advanced coating and laminating production lines, -mainly producing PVC,PET,TPU,TPO,and other sandwich materials used in tents,membrane structures,airtightness,luggage,protection,medical,and other fields.

Contact us

Tel:0086 15958345754 

Email: Lex@zjhanlong.cn

Our Fcatory:Building B, No. 16 Huajin Road, Zhouwangmiao Town, Haining City, Jiaxing City, Zhejiang Province